The Sony ECM-CS10 is a unidirectional stereo clip on microphone designed for
capturing conferences, meetings, lectures, performances and stereo ambient
recording. The capsule houses 2 omnidirectional elements allowing even signal
response at the direct and off-axis sections of each capsule. An integrated
2-way power supply allows plug-in power from select Sony or Aiwa recorders. An
integrated stand allows mounting when capturing audio in meetings and
conferences. An oxygen-free copper litz cable is terminated with an L shaped
3.4mm stereo mini cable.
Note! Requires Sony plug-in power and will not work with third party mini connections.
Two unidirectional elements result in accurate stereo capturing of performances, speech, ambiance and more.
The unidirectional pattern effectively minimizes off-axis noise, ambiance and feedback.
|Polar Pattern||Uni-directional x2|
|Frequency Response||50Hz to 16kHz|
|Dynamic Range (Typical)||not specified by manufacturer|
|Signal-to-Noise Ratio||38dB SPL|
|Maximum Input Sound Level||Approx. 110 dB SPL (at 1 kHz, 3% distortion, 0 dB SPL = 2 x 10-5 Pa)|
|Power Requirements||External (plug-in) power only|
|Output Impedance||not specified by manufacturer|
|Output Connectors||L-shaped 3.5mm mini|
|Low Frequency Roll-Off||No|
|Dimensions||1.6 x 0.5 x 1.8" (40 x 13 x 46mm)|
|Weight||0.39 oz. (11 g)|